Payment & Shipping Terms:
|Product Name:||All Purpose Spray Adhesive||State:||Liquid Adhesive|
spray adhesive for paper,
spray mount adhesive
Low VOC Liquid All Purpose Spray Adhesive 500ml with Acrylic
1. Mix round before using it and making it mix equally, the perfect temperature for constructing is 25+/-5℃, and humidity is 55-75%.
2. Deal with the surface right, such as remove oil, dust, rust, moisture and burnish.
3. When using the floor board, bamboo and other wood material, make sure it must containing water below 8%.
4. It’s usually gelatinized for one time, for man hole material, it needs to gelatinize 2-3times, and make sure gelatinize the second time after the solvent volatilization completely
5. Avoid it leave the air hole on the sub, it must towards one way when gelatinize. The thinner of the contact adhesive on the sub, the smaller of limitation and shrink, and the higher of the glue strength.
6. Airing after gelatinizing to volatilize the solvent and increase the conglutinate and solidification, then press it properly but not move it come-and-go, so that it can remove the air and improve the quality of conglutinate further.
1. Store product at 60-80℉(16-17℃) for maximum storage life, higher temperatures can reduce normal storage life, lower temperatures can cause increased viscosity of a temporary nature. Rotate stock on “first in first out” basis.
2. Content under pressure, don’t pierce the can even when it’s empty
3. Keep out of fire, flame, high temperature and any ignition source
4. Keep out reach of Children
5. No Swallow and it’s better not to contact with human skin.
1. Bonds to most surfaces
2. Immediate bond on contact
3. Bonds dissimilar materials
4. Good heat resistance when bonded
5. Will not soak into porous materials
Contact Person: Mrs. Cherry Zhang