peelable rubber coating acrylic spray paint

400ML Multi Purpose Peelable Film Coating Spray Paint / Colorful Rubber Paint Spray

Specifications:

Description:

1. Multi-purpose peelable film coating spray is formulated by Aristo to meet the demand of many industrial & DIY applications including surface protection, masking, decoration and long term preservation.

2. It is used on most non-porous surfaces such as plastics, acrylics, marble, work surfaces, stainless steel, concrete, lacquered flooring, tiles and paintwork etc..

3. These environmentally friendly coating forms a skin-tight, rubber film which can be easily stripped away, it is ideal for a broad array of do-it-yourself projects around the home, garage, garden and elsewhere.

4. It protects coated items against moisture, acids, abrasion, corrosion and skidding / slipping, and will not crack or become brittle in extreme weather conditions.

Applications:

1. Surface to be sprayed shall be clean, dry and free of dust, oil grease and dirt;

2. Shake can for 1 minute after ball rattles.

3. Apply 2-4 coats to achieve a min wet film thickness, the tack-free time is 3-8 mins at room temperature, it can be removed after it is cured easily by hand peeling.

Warm Remind:

1.    Using this material in cooler temperatures may affect drying times, finish quality and spray performance.

2.    If you plan on spraying your project in cooler conditions, we recommend pre-warming the aerosol can by placing it in a warm room and allowing the contents to reach room temperature.

3.    Under no circumstances should users subject the aerosol can to temperature above 120° F or use heat from an open flame or other sources of ignition to pre-warm the spray can.

4.    Additionally, cooler conditions may affect the surface you are spraying, if you are concerned about spraying your project in cooler temperature, test in an inconspicuous area first to ensure the resulting finish will be what you are looking for.

WARNING:

1. Pressurized container, keep away from direct sunlight and do not expose to temperatures of exceeding 120° F (50° C).
2. Store in a cool, well ventilated area out of the sun. Do not pierce, pressurize, cut or burn container even when empty.
3. Do not spray near naked flame or any incandescent material. Keep away from heat, sparks,  sources of ignition.
4. Exposure to fumes may cause dryness . Inhalation of fumes may cause drowsiness and dizziness.
5. Wear protective equipment including gloves, safety glasses properly. Wash thoroughly after handling.
6. Use only in well ventilated areas.

7. Keep out of the reach of children.

Competitive Advantage:

1. Fast Drying

2. Wash Resistant

3. Temporary Protective Coatings